Certified
by The Birdwell Company to be in compliance with applicable UL
and CSA codes and standards. Condenser (outdoor) section is
Class 1, Division 1,Groups C, & D or optional Class 1,
Division 2, Groups C & D. Evaporator (indoor) section is
general purpose.
ETL
Listed units are available.
Entire
unit cabinet constructed of 20 gauge type 304 (type 316
optional) stainless steel for maximum protection from corrosive
environments.
Spark
resistant blowers..
Ozone
friendy 134a refrigerant.
Condenser
fan is oversized to operate in high ambient conditions up to
130F
|
Evaporator
and condenser coils have copper tubes and aluminum fins.
Standard
matching enclosure mounting frame for quick and inexpensive
installation cost.
Optional
Thermoguard, Heresite baked phenolic, or epoxy coil coatings for
corrosion protection.
High
efficiency full hermetic compressor.
Unit
is fully serviceable from access panels..
Built-in
supply/return grilles.
Hot
gas bypass to prevent evaporator icing
Condenser
fan cycling for head pressure control.
Power
requirements is 115/230/1 50 or 60 Hz
|
